Taking measurements is the be-all and end-all

In the case of extensions or renovations, it is particularly important that we have accurate plans of the existing structures. existing structures. For the construction surveys, we use a Leica Builder 509 total station. With this device and the seamless integration in CADWORK 3D, buildings can be effortlessly surveyed with a laser beam, wirelessly transferred to a notebook and mapped three-dimensionally in CAD with millimeter to the millimeter. This real geometry can later be used as the basis for the construction plans. can be built. In addition to the dimensional surveys, we are also responsible for the structural calculations and fire protection.

The construction project
The existing commercial building is a three-story skeleton construction made of reinforced concrete elements. On top of this, an additional floor is now being built on the entire roof area as a parking deck for motor vehicles. built. The wooden extension will be 50 meters long and 38 meters wide. The access road for the additional 4th floor will be a new 35 meter long wooden ramp. The additional loads at both ends of the ramp will be carried by steel sections. As grating will be installed as the driving surface of the open ramp. The floor structure of the consists of an interceptor grating made of steel sections with inserted Above this, wood-based panels form the static pane. The roof is also The roof is also made of wood: Gable roof girders transfer the roof loads to external supports.